- Add Mailbox Alias Directory to Inbox
- Appends a subdirectory at the end of
the host's configured inbox directory. This allows files received through different
mailboxes to be kept separate.
- Possible values: On or Off
- Default value: Off
- Add Mailbox Alias Directory to Outbox
- Appends a subdirectory at the end of
the host's configured outbox directory. This allows files to be sent through
different mailboxes to be kept separate.
- Possible values: On or Off
- Default value: Off
- Add Mailbox Alias Directory to
Receivedbox
- Appends a subdirectory at the end of
the host's configured receivedbox directory. This allows files that have been sent
through different mailboxes to be kept separate.
- Possible values: On or Off
- Default value: Off
- Add Mailbox Alias Directory to Sentbox
- Appends a subdirectory at the end of
the host's configured sentbox directory. This allows files that have been sent
through different mailboxes to be kept separate.
- Possible values: On or Off
- Default value: Off
- Allow Actions To Run Concurrently
- Normally, actions and host actions within the same host are allowed to run
concurrently. You can use this property to not allow actions and host actions to run
concurrently.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: On or Off
- Default value: On
- Command Retries
- If an error or exception occurs during
a command, the number of times the command should be retried.
Note: Command Retries
does not apply to exceptions related to TCP/IP or ISDN dial-up connections. This is
because dial-up connections are managed by the framework so that they can be shared
across actions.
- Possible values: 0 - n
- Default value: 0
- Connection Timeout
- The amount of time allowed for each
read operation.
- Possible values: 0 - n
seconds
0 indicates no timeout
- Default value: 150 seconds
- Delete Zero Length Files
- Indicates whether files received that are zero-length (<= 5 bytes) should be deleted
rather than processed.
- Possible values: On or Off
- Default value: Off
- Disable TE Headers
- When selected, disables the TE and
Transfer Encoding request headers.
- Possible values: On or Off
- Default value: Off
- Do Not Send Zero Length Files
- Indicates whether zero length files to be sent to the server should be ignored
rather than processed. If the -DEL option is being used, any zero length
file ignored will also be deleted.
- Possible values: On or Off
- Default value: Off
- Email On Check Conditions Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are met. See Configuring email or execute based on results.
Note: This is a Cleo Harmony
and Cleo VLTrader option.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Check Conditions Not Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are not met. See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Fail
- If an error occurs during a command,
email the error condition. See Email/Execute
Based on Results.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Flag
- If a flagged event occurs, email the event. See
Configuring email or execute based on results.
- Email addresses separated by commas (,), semicolons
(;) or colons (:). The first address should be an internal email address.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Repetitive Action
Failures
- When "Email On Fail" is enabled and the same failure occurs each time an action is
run for a specific host, leaving this option unchecked suppresses emailing of the same
alert multiple times. If the same email alert continues to be suppressed after 24 hours,
the suppressed email alert will be sent every 24 hours and after every system restart if
the failure occurs again. When the failure is resolved an email alert will be
sent.
Note: This feature only suppresses multiple emails if the same failure occurs
multiple times in a row. Suppression is not maintained across synchronized
hosts.
- Possible values: On or Off
- Default value: On
- Email On Successful Copy
- Send an email notification after
copying a file using LCOPY. See Configuring email or execute based on results.
- Possible values: Email addresses separated by commas (,), semicolons (;) or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Successful Receive
- Send an email notification after
successfully receiving a file. See Configuring email or execute based on results.
- Possible values: Email addresses separated by commas (,), semicolons (;) or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Successful Send
- Send an email notification after
successfully sending a file. See Configuring email or execute based on results.
- Possible values: Email addresses separated by commas (,), semicolons (;) or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Execute On Check Conditions Met
- After executing a CHECK command where the overall conditions are
met, run a system command. See Configuring email or execute based on results.
Note: This is a
Cleo Harmony and Cleo VLTrader option.
Note: Note that if multiple files contribute to the conditions being met, and one
of the file macros is in the command (e.g., %file%), the system
command will be executed repeatedly - once for each file.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Check Conditions Not Met
- After executing a CHECK command where the overall conditions are
not met, run a system command. See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Fail
- If an error occurs during a command,
run a system command. See Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Repetitive Action
Failures
-
When Execute On Fail is enabled and the same failure occurs each
time an action is run for a specific host, leaving this option unchecked suppresses
multiple executions of the Execute On Fail command. If suppression
of execution of the command for this failure continues after 24 hours, the suppressed
Execute On Fail command will be executed every 24 hours and after a
system restart if the failure occurs again. When the failure is resolved, the
Execute On Fail command will be executed again. Users must account
for this by including the %status% macro variable for the Execute On
Fail command (see Using macro variables) and then checking for a
success or failure.
Note: This feature only suppresses multiple executions of the Execute On
Fail command if the same failure occurs multiple times in a row.
Suppression is not maintained across synchronized hosts.
- Possible values: On or Off
- Default value: On
- Execute On Successful Copy
- After successfully copying a file
using LCOPY, run a system command. This command may be used for
post-processing the file. See Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Successful Receive
- After successfully receiving a file,
run a system command. This command may be used for post-processing the file. See
Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Successful Send
- After successfully sending a file, run
a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Fixed Record EOL Characters
- End-of-line characters to be inserted
and/or deleted.
- Possible values: 0 to n
characters.
Special character sequences:
- \r - carriage return
- \n - new line (linefeed)
- \f - form feed
- \t - horizontal tab
- \0 - null
- \\ - backslash
- Fixed Record Incoming Delete EOL
- If Fixed Record EOL Characters has been specified and Fixed Record Length is greater
than 0, indicates to look for and delete EOL characters while receiving a file.
Note: When
using FTP ASCII mode, standard EOL characters may already be changing if transferring
between Windows and Unix platforms.
- Possible values: On or Off
- Default value: Off
- Fixed Record Incoming Insert EOL
- If Fixed Record EOL Characters has been specified and Fixed Record Length is greater
than 0, indicates to insert EOL characters while receiving a file.
Fixed Record Incoming
Delete EOL and Fixed Record Incoming Insert EOL are mutually exclusive
properties.
- Possible values: On or Off
- Default value: Off
- Fixed Record Length
- The fixed record length after which
end-of-line characters need to be inserted and/or deleted.
- Possible values: 0 - n
- Default value: 0
- Fixed Record Outgoing Insert EOL
- If Fixed Record EOL Characters has been specified and Fixed Record Length is greater
than 0, indicates to insert EOL characters while sending a file.
Note: When using FTP
ASCII mode, standard EOL characters may already be changing if transferring between
Windows and Unix platforms.
- Possible values: On or Off
- Default value: Off
- Get Number of Files Limit
- Limits the number of files retrieved
from a server directory listing by one GET command.
- Possible values: 0 -
n
0 indicates no limit.
- Default value: 0
- High Priority
- Indicates whether incoming and/or outgoing transfers through the host should be treated
as high priority. When both high priority and regular priority transfers are active, the
high priority transfers get a larger portion of the available
bandwidth. Go
to to set the High Priority Transfers Percentage Available
Bandwidth (defaults to 75). See
Other system options for more information.
-
Note: This is a Cleo Harmony and
Cleo VLTrader option.
Warning: If the trading partner’s bandwidth (and not Cleo Harmony's or Cleo VLTrader’s) is limiting the
transfer rate, then setting High Priority will not increase the transfer rate and will
only result in potentially slowing down other Cleo Harmony or Cleo VLTrader transfers. Also, do not
attempt to set High Priority Incoming or Outgoing on a host where the same instance of
Cleo Harmony or Cleo VLTrader is both the client and
server (for example, a local looptest).
- Possible values:
- Include Failure In Subject Of Email
- When specified, the exception message will be included in the email that is
generated on failure.
Note: If the exception message exceeds 256 characters, it will be
truncated.
- Possible values: On or Off
- Default value: The value specified for this property on the panel
- LCOPY Archive
- If specified, contains the directory for archiving LCOPY source
files.
- Possible values: Any local or shared directory. Macros can be used. See
Using macro variables (LCOPY Archive context).
- Default value: The value specified for this property on the panel, if any.
- Log Full HTML PUT Response
- Allows the full HTML response from the
server to be logged rather than just the return status.
- Possible values: On or Off
- Default value: Off
- Log Individual LCOPY Results To Transfer Logging
- When this option is enabled, a <send> and
<receive> result is logged to the transfer log for each file
copied.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: On or Off
- Default value: Off
- Macro Date Format
- Specifies the date format to be used when the %date% macro is
used.
- Possible values: See Using macro variables for information about usage and
possible date/time formats.
- Default value: The value specified for this property on the panel, if any.
- Macro Time Format
- Specifies the time format to be used when the %time% macro is
used.
- Possible values: See Using macro variables for information about usage
and possible date/time formats.
- Default value: The value specified for this property on the panel, if any.
- Maximum Incoming Transfer Rate
(kbytes/s)
- Sets the maximum incoming transfer rate in Kbytes (1024 bytes) per second for each
mailbox or host. The default value of 0 does not limit the transfer
rate. The Maximum Incoming Transfer Rate system setting might also limit the transfer
rates. The system Maximum Incoming Transfer Rate value is used unless this setting is more
restrictive. For simultaneous transfers, the number of active transfers also affects
individual transfer rates. See
Advanced system options.
- Possible values: 0 - n
- Default value: 0
- Maximum Outgoing Transfer Rate
(kbytes/s)
- Sets the maximum outgoing transfer rate in Kbytes (1024 bytes) per second for each
mailbox or host. The default value of 0 does not limit the transfer
rate. The system setting might also limit the transfer rates. The system Maximum Outgoing
Transfer Rate value is used unless this setting is more restrictive. For simultaneous
transfers, the number of active transfers will also affect individual transfer rates. See
Advanced system options for more information about Maximum
Outgoing Transfer Rate.
- Possible values: 0 - n
- Default value: 0
- Next File On Fail
- When a download fails, indicates
whether a wildcarded GET should proceed to the next available file
rather than terminate if the server is still connected.
- Possible values: On or Off
- Default value: Off
- Omit Name Parameter From Content
Type
- When selected, the applicable file name
is not included in the Content-Type header.
- Possible values: On or Off
- Default value: Off
- Only Download If Directory Line Changed
- When selected, the application only downloads a file as part of a GET
-DIR command if the server's directory entry for the file has changed since
the last download. For servers that include a file's last modified time/date and size in
the directory listing (most likely if using an HTTP GET rather than
POST method to get the directory), this prevents the same file from
being downloaded more than once when deleting the file after download is not an option.
For this property to work properly, the same action must be used for each download,
as the previous directory listing is saved with the specific action.
- Possible values: On or Off
- Default value: Off
- Outbox Sort
- Controls the order in which multiple files are transferred for a
PUT command. If System Default is specified,
the value set on the tab takes precedence. For Alphabetical ordering,
the file extensions are not used to determine the sorted order unless they are needed to
make the filenames unique.
- Possible values:
- System Default
- Alphabetical
- Date/Time Modified
- Default value: System Default
- Outgoing Insert EOL Between
Interchanges
- If Fixed Record Outgoing Insert EOL is active, indicates to
also insert EOL characters between EDI interchanges while sending the file.
- Possible values: On or Off
- Default value: Off
- Partner Email Address
- The email address of the trading
partner for this trading relationship. When set, this address is automatically used
to send your local profile information and/or certificates to your trading partner.
SeeEmailing a profile to your trading partner.
- Possible values: Email address(es) separated by commas (,), semicolons (;) or
colons ( : ).
Note: This is a
Cleo LexiCom only option. For
Cleo Harmony and
Cleo VLTrader, this information is
stored in the trading partner management table. See
Managing Trading Partners.
- PGP Compression Algorithm
- Compression method used when OpenPGP packaging (with compression) is requested
through the Mailbox Packaging tab. See Configuring mailbox packaging. If System Default is
specified, the value set on the tab is in effect.
- Possible values:
- Default value: System Default
- PGP Encryption Algorithm
- Encryption method used when OpenPGP packaging (with encryption) is requested through
the Mailbox Packaging tab. See Configuring mailbox packaging. If System Default is specified, the value set on the tab takes precedence.
- Possible values:
- System Default
- TripleDES
- Blowfish
- CAST5
- DES
- AES-128
- AES-192
- AES-256
- Twofish
- Default value: System Default
- PGP Hash Algorithm
- Signing method used when OpenPGP packaging (with signing) is requested through the
Configuring mailbox packaging. If System Default is
specified, the value set on the tab takes precedence.
- Possible values:
- System Default
- MD2
- MD5
- RIPE-MD-160
- SHA-1
- SHA-256
- SHA-384
- SHA-512
- Default value: System Default
- PGP Integrity Check
- When OpenPGP encrypting (see Configuring mailbox packaging), include an
integrity check on encrypted data. Can be disabled for compatibility with certain OpenPGP
implementation.
- Possible values: On or Off
- Default value: On
- PGP Signature Verification
- Indicates whether or not signed inbound PGP messages should verified when inbound
OpenPGP packaging is requested through the Mailbox Packaging tab. See
Configuring mailbox packaging. In general, this property should be enabled.
- Possible values: On or Off
- Default value: On
- PGP V3 Signature
- Post Parameters On Request Line
- Indicates that web server does not accept POST parameters via
application/form-data or application/x-www-form-urlencoded content-types but instead
requires that the POST parameters be on the HTTP request line.
- This setting is ignored if the Content-type is explicitly set to
multipart/format-data.
- Possible values: On or Off
- Default value: Off
- Reset Connection After Timeout On
Response
- When enabled will cause an immediate reset on the socket (instead of a graceful
close) when a SocketTimeoutException occurs.
- Possible values: On or Off
- Default value: Off
- Retry Delay
- The amount of time (in seconds) before
a retry should be attempted.
- Possible values: Any value greater than zero.
- Default value: 60 seconds
- Reuse SSL Sessions Across Actions
- If selected, SSL sessions from previous connections to the same destination
(address and port number) may be resumed to avoid costly negotiation. If unselected, only
SSL sessions used in the current action to the same destination may be resumed. When
unselected, a new SSL session is created for the initial command port connection.
- Possible values: On or Off
- Default value: On
- Server Type
- Indicates a specific HTTP server that
requires special processing of the outbound message or the returned response.
- Possible values: Any server from the supported list.
- SSL Allow Legacy Renegotiation
- When selected, legacy renegotiation is allowed. If this property is not selected,
the extension described in RFC5746 is used for renegotiation and the server
must also support this extension. See RFC5746
for a description of the extension and the vulnerability it addresses.
- Possible values: On or Off
- Default value: On
- SSL Cipher
- Indicates a specific cipher to be used
with the server for SSL key exchange, encryption, and hashing. If not set, the list of
supported ciphers is presented to the server and the server picks one.
- Possible values: Any cipher from the supported list. If the server does not
also support the cipher, an SSL handshake error will occur.
- SSL Maximum Protocol Version
- Specifies the maximum protocol version allowed. By default, this field is blank,
designating that Cleo Harmony,
Cleo VLTrader, or Cleo LexiCom will select the most
recent version (currently TLS 1.2).
- Possible values:
- SSL 3.0
- TLS 1.0 (SSL 3.1)
- TLS 1.1 (SSL 3.2)
- TLS 1.2 (SSL 3.3)
- SSL Minimum Encryption Key Size
- Specifies the minimum encryption key size allowed when selecting an SSL cipher. To
prevent use of low- or medium-strength ciphers, change from the default value of
0 to 112, 128, or
256 (depending on the requirement). Note that if this value is
set too high, all ciphers are filtered out causing the No suitable cipher suites
are enabled exception to occur.
- Possible values: 0 - n bits
- Default value: 0
- SSL Minimum Protocol Version
- Specifies the minimum protocol version allowed. SSL 3.0 is the default value for
compatibility with servers that do not support the more recent TLS versions 1.0, 1.1, and
1.2.
- Possible values:
- SSL 3.0
- TLS 1.0 (SSL 3.1)
- TLS 1.1 (SSL 3.2)
- TLS 1.2 (SSL 3.3)
- Default value: SSL 3.0
- SSL Use Record Splitting
- Indicates whether to use 1/n-1 record
splitting in CBC mode as a countermeasure against the Rizzo/Duong BEAST (Browser
Exploit Against SSL/TLS) attack against the SSL 3.0 / TLS 1.0 protocol. Must be turned
off if the SSL library on the other side of the connection does not support the
feature.
- Possible values: On or Off
- Default value: On
- Store Raw Sent Message
- When this property is enabled, a copy of the outbound message is stored in the
HTTP/sent directory.
- Possible values: On or Off
- Default value: Off
- Successful Put Response Phrase
- Even if the server response code is a
200 level response, if the configured phrase is not found anywhere in the content of
the server response, the PUT is not considered successful.
- Possible values: Any string. The comparison to the server response is not
case-sensitive.
- Terminate On Fail
- If an error occurs during a command, stop the action.
Note:
Regarding non-CHECK commands: When Terminate On
Fail is on, if a command fails, Email On Fail and
Execute On Fail, if set, are processed, and then the action stops.
When Terminate On Fail is off, if a command fails, Email On
Fail and Execute On Fail, if set, are processed, and the
action continues.
Regarding CHECK commands: Terminate On Fail is
only honored if the ConditionsMet parameter is set and the result of
the CHECK is classified as Error. The
CHECK command is only available in the Cleo Harmony and Cleo VLTrader applications.
- Possible values: On or Off
- Default value: On
- Unzip Use Path
- Indicates whether or not zip entry paths should be used for LCOPY
-UNZIP operations. When enabled, the entry's path is added to the destination
path, unless the entry contains an absolute path. In this case, the absolute path is used
in place of the destination path.
- Possible values: On or Off
- Default value: On
- Wait For Execute On
- Indicates whether execution should wait for processing to complete within an
Execute On Fail, Execute On Successful Copy,
Execute On Successful Receive, or Execute On Successful
Send command. Note that this option does not apply to native AS400
execution.
- Possible values: On or Off
- Default value: On
- XML Encryption Algorithm
- The method used to encrypt/decrypt files when XML Encryption packaging is requested
through the Mailbox Packaging tab. See Configuring mailbox packaging . If System Default is
specified, the value set on the tab takes precedence.
- Possible values:
- System Default
- TripleDES
- AES-128
- AES-192
- AES-256
- Default value: System Default
- Zip Comment
- Specifies the comment to be added to the zip archive file in LCOPY
-ZIP operations.
- Default value: The value specified for this property on the panel, if set.
- Zip Compression Level
- Controls the level of compression for LCOPY -ZIP operations. If
System Default is specified, the value set on the takes precedence
- Possible values:
- System Default
- 9 - (Best Compression)
- 8
- 7
- 6
- 5
- 4
- 3
- 2
- 1
- 0 - (No Compression)
- Default value: System Default
- Zip Subdirectories Into Individual Zip
Files
- Indicates whether or not subdirectories should be bundled for LCOPY –ZIP
–REC operations. When enabled, each first-level subdirectory (and all of its
descendents) will be bundled together into an individual zip file. The name of this zip
file may optionally reflect the subdirectory name if an asterisk
(*) is placed in the destination path. Any files that are directly
off the source root directory will not be copied.
- Possible values: On or Off
- Default value: On