See Setting advanced host properties for information about how to use and set the
properties supported in all protocols. Properties available for fasp include:
- Add Mailbox Alias Directory to Inbox
- Appends a subdirectory at the end of
the host's configured inbox directory. This allows files received through different
mailboxes to be kept separate.
- Possible values: On or Off
- Default value: Off
- Add Mailbox Alias Directory to Outbox
- Appends a subdirectory at the end of
the host's configured outbox directory. This allows files to be sent through
different mailboxes to be kept separate.
- Possible values: On or Off
- Default value: Off
- Allow Actions To Run Concurrently
- Normally, actions and host actions within the same host are allowed to run
concurrently. You can use this property to not allow actions and host actions to run
concurrently.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: On or Off
- Default value: On
- Command Retries
- If an error or exception occurs during
a command, the number of times the command should be retried.
Note: Command Retries
does not apply to exceptions related to TCP/IP or ISDN dial-up connections. This is
because dial-up connections are managed by the framework so that they can be shared
across actions.
- Possible values: 0 - n
- Default value: 0
- Connection Timeout
- The amount of time allowed for each
read operation.
- Possible values: 0 - n
seconds
0 indicates no timeout
- Default value: 150 seconds
- Create Target Path
- Create a target directory if it does
not already exist.
- Possible values: On or Off
- Default value: Off
- Delete Zero Length Files
- Indicates whether files received that are zero-length (<= 5 bytes) should be deleted
rather than processed.
- Possible values: On or Off
- Default value: Off
- Do Not Send Zero Length Files
- Indicates whether zero length files to be sent to the server should be ignored
rather than processed. If the -DEL option is being used, any zero length
file ignored will also be deleted.
- Possible values: On or Off
- Default value: Off
- Email On Check Conditions Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are met. See Configuring email or execute based on results.
Note: This is a Cleo Harmony
and Cleo VLTrader option.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Check Conditions Not Met
- Send an email notification after running a CHECK command where
the overall conditions of the check are not met. See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Fail
- If an error occurs during a command,
email the error condition. See Email/Execute
Based on Results.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Flag
- If a flagged event occurs, email the event. See
Configuring email or execute based on results.
- Email addresses separated by commas (,), semicolons
(;) or colons (:). The first address should be an internal email address.
- Possible values: Email addresses separated by commas (,), semicolons (;), or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Repetitive Action
Failures
- When "Email On Fail" is enabled and the same failure occurs each time an action is
run for a specific host, leaving this option unchecked suppresses emailing of the same
alert multiple times. If the same email alert continues to be suppressed after 24 hours,
the suppressed email alert will be sent every 24 hours and after every system restart if
the failure occurs again. When the failure is resolved an email alert will be
sent.
Note: This feature only suppresses multiple emails if the same failure occurs
multiple times in a row. Suppression is not maintained across synchronized
hosts.
- Possible values: On or Off
- Default value: On
- Email On Successful Copy
- Send an email notification after
copying a file using LCOPY. See Configuring email or execute based on results.
- Possible values: Email addresses separated by commas (,), semicolons (;) or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Successful Receive
- Send an email notification after
successfully receiving a file. See Configuring email or execute based on results.
- Possible values: Email addresses separated by commas (,), semicolons (;) or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Email On Successful Send
- Send an email notification after
successfully sending a file. See Configuring email or execute based on results.
- Possible values: Email addresses separated by commas (,), semicolons (;) or
colons ( : ). The first address should be an internal email address.
- Default value:The value specified for this property on the panel (if set).
- Execute On Check Conditions Met
- After executing a CHECK command where the overall conditions are
met, run a system command. See Configuring email or execute based on results.
Note: This is a
Cleo Harmony and Cleo VLTrader option.
Note: Note that if multiple files contribute to the conditions being met, and one
of the file macros is in the command (e.g., %file%), the system
command will be executed repeatedly - once for each file.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Check Conditions Not Met
- After executing a CHECK command where the overall conditions are
not met, run a system command. See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Fail
- If an error occurs during a command,
run a system command. See Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Repetitive Action
Failures
-
When Execute On Fail is enabled and the same failure occurs each
time an action is run for a specific host, leaving this option unchecked suppresses
multiple executions of the Execute On Fail command. If suppression
of execution of the command for this failure continues after 24 hours, the suppressed
Execute On Fail command will be executed every 24 hours and after a
system restart if the failure occurs again. When the failure is resolved, the
Execute On Fail command will be executed again. Users must account
for this by including the %status% macro variable for the Execute On
Fail command (see Using macro variables) and then checking for a
success or failure.
Note: This feature only suppresses multiple executions of the Execute On
Fail command if the same failure occurs multiple times in a row.
Suppression is not maintained across synchronized hosts.
- Possible values: On or Off
- Default value: On
- Execute On Successful Copy
- After successfully copying a file
using LCOPY, run a system command. This command may be used for
post-processing the file. See Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Successful Receive
- After successfully receiving a file,
run a system command. This command may be used for post-processing the file. See
Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Execute On Successful Send
- After successfully sending a file, run
a system command. This command may be used for post-processing the file. See Configuring email or execute based on results.
- Possible values: System command to be executed.
- Default value: The value specified for this property on the panel (if set).
- Include Failure In Subject Of Email
- When specified, the exception message will be included in the email that is
generated on failure.
Note: If the exception message exceeds 256 characters, it will be
truncated.
- Possible values: On or Off
- Default value: The value specified for this property on the panel
- LCOPY Archive
- If specified, contains the directory for archiving LCOPY source
files.
- Possible values: Any local or shared directory. Macros can be used. See
Using macro variables (LCOPY Archive context).
- Default value: The value specified for this property on the panel, if any.
- Log Individual LCOPY Results To Transfer Logging
- When this option is enabled, a <send> and
<receive> result is logged to the transfer log for each file
copied.
Note: This is a Cleo Harmony and Cleo VLTrader option.
- Possible values: On or Off
- Default value: Off
- Macro Date Format
- Specifies the date format to be used when the %date% macro is
used.
- Possible values: See Using macro variables for information about usage and
possible date/time formats.
- Default value: The value specified for this property on the panel, if any.
- Macro Time Format
- Specifies the time format to be used when the %time% macro is
used.
- Possible values: See Using macro variables for information about usage
and possible date/time formats.
- Default value: The value specified for this property on the panel, if any.
- Minimum Rate (kilobits/s)
- The minimum desired transfer rate in
kilobits per second (kbps).
- Possible values: 0 - n
- Default value: 0
- Only Retrieve First Available File
- Indicates a GET *
should only retrieve the first available file from the server.
- Possible values: On or Off
- Default value: Off
- Only Retrieve Last Available File
- Indicates a GET *
should only retrieve the last available file from the server.
- Possible values: On or Off
- Default value: Off
- Outbox Sort
- Controls the order in which multiple files are transferred for a
PUT command. If System Default is specified,
the value set on the tab takes precedence. For Alphabetical ordering,
the file extensions are not used to determine the sorted order unless they are needed to
make the filenames unique.
- Possible values:
- System Default
- Alphabetical
- Date/Time Modified
- Default value: System Default
- Overwrite
- Policy used to overwrite existing files
at the destination. See Overwrite and Resume Check properties for more
information.
- Possible values:
- Always - Always re-transfer the file.
- Different - Overwrite only if the existing file is
different.
- Different and Older - Overwrite only if the existing file is
both different and older.
- Never - Do not overwrite - skip transferring the file.
- Older - Overwrite only if the existing file is older.
- Default value: Always
- Partner Email Address
- The email address of the trading
partner for this trading relationship. When set, this address is automatically used
to send your local profile information and/or certificates to your trading partner.
SeeEmailing a profile to your trading partner.
- Possible values: Email address(es) separated by commas (,), semicolons (;) or
colons ( : ).
Note: This is a
Cleo LexiCom only option. For
Cleo Harmony and
Cleo VLTrader, this information is
stored in the trading partner management table. See
Managing Trading Partners.
- Policy
- Transfer rate policy with respect to
other simultaneous transfers.
- Possible values:
- Adaptive - Transfer using adaptive mode for being fair to
other flows.
- Fixed - Transfer using fixed mode for constant transfer at
the specified rate.
- Trickle - Transfer using trickle mode for utilizing unused
bandwidth.
- Default value: Adaptive
- Post Get Command
- Post Put Command
-
In an action, specify commands to be executed only after a successful
GET or PUT as post-get or post-put commands,
respectively. When using this property, use a SET command within
the action before the GET or PUT
command rather than the Advanced tab.
The Post Put Command can be set to QUIT, which allows a
disconnect and reconnect between file uploads when necessary.
- If multiple FTP commands are needed after the GET or
PUT, set this property to all of the commands separated by
semicolons (;). If a specific FTP command needs to contain a semicolon, enclose that
specific FTP command in quotes ("). Use of macro variables is supported. Refer to Using macro variables (Post/Pre Command context) for a list of the applicable macros.
- Pre Get Command
- Pre Put Command
- In an action, specify commands to be executed before a GET or
PUT as pre-get or pre-put commands, respectively. This has the
benefit of keeping the log results relative to just GETs and
PUTs (especially important for Cleo VLTrader and Cleo Harmony
GET transfer logging). In addition, for the PUT, it
avoids connecting and logging into the server when there are no files to send. When using
this property, use a SET command within the action before the
GET or PUT command rather than the
Advanced tab.
- If multiple FTP commands are needed prior to the GET or PUT, set this property to
all of the commands separated by semicolons (;). If a specific FTP command needs
to contain a semicolon, enclose that specific FTP command in quotes ("). Use of macro
variables is supported. See Using macro variables (Post/Pre Command context) for a
list of the applicable macros.
- Pre Put Command For First File Only
- If a Pre Put Command is specified,
indicates whether to execute them before each file being transferred by the
PUT or only before the first file transfer.
- Possible values: On or Off
- Default value: On
- Preserve Dates
- Preserve file date attributes.
- Possible values: On or Off
- Default value: Off
- Resume Check
- Resume policy used for partially
transferred files. See Overwrite and Resume Check properties for more
information.
- Possible values:
- File Attributes- If the sizes of both files match, do not
re-transfer
- Full Checksum - If the full checksums of both files match,
do not re-transfer.
- Off - Replace the file.
- Sparse Checksum - If the sparse checksums of both files
match, don't re-transfer.
- Default value: Off
- Retry Delay
- The amount of time (in seconds) before
a retry should be attempted.
- Possible values: Any value greater than zero.
- Default value: 60 seconds
- Target Rate (kilobits/s)
- The target transfer rate in kilobits
per second (kbps). A value of zero uses the default Aspera rate, typically
10000.
- Possible values: 0 - n
- Default value: 0
- Terminate On Fail
- If an error occurs during a command, stop the action.
Note:
Regarding non-CHECK commands: When Terminate On
Fail is on, if a command fails, Email On Fail and
Execute On Fail, if set, are processed, and then the action stops.
When Terminate On Fail is off, if a command fails, Email On
Fail and Execute On Fail, if set, are processed, and the
action continues.
Regarding CHECK commands: Terminate On Fail is
only honored if the ConditionsMet parameter is set and the result of
the CHECK is classified as Error. The
CHECK command is only available in the Cleo Harmony and Cleo VLTrader applications.
- Possible values: On or Off
- Default value: On
- Transport Encryption
- Specifies the encryption cipher to be
used on the UDP transport.
- Possible values:None or
AES128
- Default value: None
- Unzip Use Path
- Indicates whether or not zip entry paths should be used for LCOPY
-UNZIP operations. When enabled, the entry's path is added to the destination
path, unless the entry contains an absolute path. In this case, the absolute path is used
in place of the destination path.
- Possible values: On or Off
- Default value: On
- Wait For Execute On
- Indicates whether execution should wait for processing to complete within an
Execute On Fail, Execute On Successful Copy,
Execute On Successful Receive, or Execute On Successful
Send command. Note that this option does not apply to native AS400
execution.
- Possible values: On or Off
- Default value: On
- Zip Comment
- Specifies the comment to be added to the zip archive file in LCOPY
-ZIP operations.
- Default value: The value specified for this property on the panel, if set.
- Zip Compression Level
- Controls the level of compression for LCOPY -ZIP operations. If
System Default is specified, the value set on the takes precedence
- Possible values:
- System Default
- 9 - (Best Compression)
- 8
- 7
- 6
- 5
- 4
- 3
- 2
- 1
- 0 - (No Compression)
- Default value: System Default
- Zip Subdirectories Into Individual Zip
Files
- Indicates whether or not subdirectories should be bundled for LCOPY –ZIP
–REC operations. When enabled, each first-level subdirectory (and all of its
descendents) will be bundled together into an individual zip file. The name of this zip
file may optionally reflect the subdirectory name if an asterisk
(*) is placed in the destination path. Any files that are directly
off the source root directory will not be copied.
- Possible values: On or Off
- Default value: On