HSP Configuration / HSP host configuration
Parent topic: HSP host configuration

HSP Host: Advanced Tab

See Setting advanced host properties for information about how to use and set the properties supported in all protocols. Properties available for HSP include:

Add Mailbox Alias Directory to Inbox
Possible values: On or Off
Default value: Off
Add Mailbox Alias Directory to Outbox
Appends a subdirectory at the end of the host's configured outbox directory.  This allows files to be sent through different mailboxes to be kept separate.
Possible values: On or Off
Default value: Off
Add Mailbox Alias Directory to Receivedbox
Appends a subdirectory at the end of the host's configured receivedbox directory.  This allows files that have been sent through different mailboxes to be kept separate.
Possible values: On or Off
Default value: Off
Add Mailbox Alias Directory to Sentbox
Appends a subdirectory at the end of the host's configured sentbox directory.  This allows files that have been sent through different mailboxes to be kept separate.
Possible values: On or Off
Default value: Off
Allow Actions To Run Concurrently
Normally, actions and host actions within the same host are allowed to run concurrently. You can use this property to not allow actions and host actions to run concurrently.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: On or Off
Default value: On
Buffer Size (kbytes)
The size of the data blocks (in kbytes) used to transfer the message over each channel.
Possible values: 1 - n
Default value: 32
Command Retries
If an error or exception occurs during a command, the number of times the command should be retried.
Note: Command Retries does not apply to exceptions related to TCP/IP or ISDN dial-up connections. This is because dial-up connections are managed by the framework so that they can be shared across actions.
Possible values: 0 - n
Default value: 0
Connection Timeout
The amount of time allowed for each read operation.
Possible values: 0 - n seconds

0 indicates no timeout

Default value: 150 seconds
Do Not Send Zero Length Files
Indicates whether zero length files to be sent to the server should be ignored rather than processed. If the -DEL option is being used, any zero length file ignored will also be deleted.
Possible values: On or Off
Default value: Off
Email On Check Conditions Met
Send an email notification after running a CHECK command where the overall conditions of the check are met.  See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Check Conditions Not Met
Send an email notification after running a CHECK command where the overall conditions of the check are not met. See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Fail
If an error occurs during a command, email the error condition.  See Email/Execute Based on Results.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Flag
If a flagged event occurs, email the event. See Configuring email or execute based on results.
Email addresses separated by commas (,), semicolons (;) or colons (:). The first address should be an internal email address.
Possible values: Email addresses separated by commas (,), semicolons (;), or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Repetitive Action Failures
When "Email On Fail" is enabled and the same failure occurs each time an action is run for a specific host, leaving this option unchecked suppresses emailing of the same alert multiple times.  If the same email alert continues to be suppressed after 24 hours, the suppressed email alert will be sent every 24 hours and after every system restart if the failure occurs again. When the failure is resolved an email alert will be sent.
Note: This feature only suppresses multiple emails if the same failure occurs multiple times in a row. Suppression is not maintained across synchronized hosts.
Possible values: On or Off
Default value: On
Email On Successful Copy
Send an email notification after copying a file using LCOPY.  See Configuring email or execute based on results.
Possible values: Email addresses separated by commas (,), semicolons (;) or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Successful Receive
Send an email notification after successfully receiving a file.  See Configuring email or execute based on results.
Possible values: Email addresses separated by commas (,), semicolons (;) or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Email On Successful Send
Send an email notification after successfully sending a file.  See Configuring email or execute based on results.
Possible values: Email addresses separated by commas (,), semicolons (;) or colons ( : ).  The first address should be an internal email address.
Default value:The value specified for this property on the Options > Advanced panel (if set).
Execute On Check Conditions Met
After executing a CHECK command where the overall conditions are met, run a system command.  See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Note: Note that if multiple files contribute to the conditions being met, and one of the file macros is in the command (e.g., %file%),  the system command will be executed repeatedly - once for each file.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Check Conditions Not Met
After executing a CHECK command where the overall conditions are not met, run a system command.  See Configuring email or execute based on results.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Fail
If an error occurs during a command, run a system command.  See Configuring email or execute based on results.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Repetitive Action Failures

When Execute On Fail is enabled and the same failure occurs each time an action is run for a specific host, leaving this option unchecked suppresses multiple executions of the Execute On Fail command.  If suppression of execution of the command for this failure continues after 24 hours, the suppressed Execute On Fail command will be executed every 24 hours and after a system restart if the failure occurs again.  When the failure is resolved, the Execute On Fail command will be executed again.  Users must account for this by including the %status% macro variable for the Execute On Fail command (see Using macro variables) and then checking for a success or failure.    

Note: This feature only suppresses multiple executions of the Execute On Fail command if the same failure occurs multiple times in a row.  Suppression is not maintained across synchronized hosts.
Possible values: On or Off
Default value: On
Execute On Successful Copy
After successfully copying  a file using LCOPY, run a system command.  This command may be used for post-processing the file.  See Configuring email or execute based on results.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Successful Receive
After successfully receiving a file, run a system command.  This command may be used for post-processing the file.  See Configuring email or execute based on results.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Execute On Successful Send
After successfully sending a file, run a system command.  This command may be used for post-processing the file.  See Configuring email or execute based on results.
Possible values: System command to be executed.
Default value: The value specified for this property on the Options > Advanced panel (if set).
Include Failure In Subject Of Email
When specified, the exception message will be included in the email that is generated on failure.
Note: If the exception message exceeds 256 characters, it will be truncated.
Possible values: On or Off
Default value: The value specified for this property on the Options > Advanced panel
Integrity Algorithm
When NONE is not specified, the content of the message will be hashed using the desired algorithm when sending and will be verified by the HSP using the same algorithm to validate the content has not been changed while in-transit.
Possible values:
  • NONE
  • MD5
  • SHA
  • SHA256
Default value: NONE
LCOPY Archive
If specified, contains the directory for archiving LCOPY source files.
Possible values: Any local or shared directory. Macros can be used.  See Using macro variables (LCOPY Archive context).
Default value: The value specified for this property on the Options > Advanced panel, if any.
Log Individual LCOPY Results To Transfer Logging
When this option is enabled, a <send> and <receive> result is logged to the transfer log for each file copied.
Note: This is a Cleo Harmony and Cleo VLTrader option.
Possible values: On or Off
Default value: Off
Macro Date Format
Specifies the date format to be used when the %date% macro is used.
Possible values: See Using macro variables for information about usage and possible date/time formats.
Default value: The value specified for this property on the Options > Advanced panel, if any.
Macro Time Format
Specifies the time format to be used when the %time% macro is used.
Possible values: See Using macro variables for information about usage and possible date/time formats.
Default value: The value specified for this property on the Options > Advanced panel, if any.
Maximum Incoming Transfer Rate (kbytes/s)
Sets the maximum incoming transfer rate in Kbytes (1024 bytes) per second for each mailbox or host. The default value of 0 does not limit the transfer rate. The Maximum Incoming Transfer Rate system setting might also limit the transfer rates. The system Maximum Incoming Transfer Rate value is used unless this setting is more restrictive. For simultaneous transfers, the number of active transfers also affects individual transfer rates. See Advanced system options.
Possible values: 0 - n
Default value: 0
Maximum Outgoing Transfer Rate (kbytes/s)
Sets the maximum outgoing transfer rate in Kbytes (1024 bytes) per second for each mailbox or host. The default value of 0 does not limit the transfer rate. The system setting might also limit the transfer rates. The system Maximum Outgoing Transfer Rate value is used unless this setting is more restrictive. For simultaneous transfers, the number of active transfers will also affect individual transfer rates. See Advanced system options for more information about Maximum Outgoing Transfer Rate.
Possible values: 0 - n
Default value: 0
Minimum Size Per Channel (kbytes)
Reduces the number of requested channels depending on the overall size of the file. This helps balance the efficiency of the protocol for small files. If the file is smaller than the value you set, a single request is used to transfer the file.
Default value: 1024
Outbox Sort
Controls the order in which multiple files are transferred for a PUT command.  If System Default is specified, the value set on the Configure > Options > Advanced tab takes precedence.  For Alphabetical ordering, the file extensions are not used to determine the sorted order unless they are needed to make the filenames unique.
Possible values:
  • System Default
  • Alphabetical
  • Date/Time Modified
Default value: System Default
Partner Email Address
The email address of the trading partner for this trading relationship.  When set, this address is automatically used to send your local profile information and/or certificates to your trading partner. SeeEmailing a profile to your trading partner.
Possible values: Email address(es) separated by commas (,), semicolons (;) or colons ( : ). 
Note: This is a Cleo LexiCom only option. For Cleo Harmony and Cleo VLTrader, this information is stored in the trading partner management table. See Managing Trading Partners.
Reset Connection After Timeout On Response
When enabled will cause an immediate reset on the socket (instead of a graceful close) when a SocketTimeoutException occurs.
Possible values: On or Off
Default value: Off
Resume Failed Transfers
When selected and a transfer fails (and Command Retries > 0), attempt to resume the transfer on a retry. If OpenPGP is enabled on the packaging tab (see Configuring mailbox packaging), the entire file is transferred instead of resuming with a partial file. The server must support the FEAT, SIZE, and REST STREAM extensions to FTP. For more information, visit http://tools.ietf.org/html/rfc3659.
Possible values: On or Off
Default value: Off
Retry Delay
The amount of time (in seconds) before a retry should be attempted.
Possible values: Any value greater than zero.
Default value: 60 seconds
Reuse SSL Sessions Across Actions
If selected, SSL sessions from previous connections to the same destination (address and port number) may be resumed to avoid costly negotiation. If unselected, only SSL sessions used in the current action to the same destination may be resumed.  When unselected, a new SSL session is created for the initial command port connection.
Possible values: On or Off
Default value: On
SSL Allow Legacy Renegotiation
When selected, legacy renegotiation is allowed. If this property is not selected, the extension described in RFC5746 is used for renegotiation and the server must also support this extension. See RFC5746 for a description of the extension and the vulnerability it addresses.
Possible values: On or Off
Default value: On
SSL Cipher
Indicates a specific cipher to be used with the server for SSL key exchange, encryption, and hashing. If not set, the list of supported ciphers is presented to the server and the server picks one.
Possible values: Any cipher from the supported list. If the server does not also support the cipher, an SSL handshake error will occur.
SSL Maximum Protocol Version
Specifies the maximum protocol version allowed. By default, this field is blank, designating that Cleo Harmony, Cleo VLTrader, or Cleo LexiCom will select the most recent version (currently TLS 1.2).
Possible values:
  • SSL 3.0
  • TLS 1.0 (SSL 3.1)
  • TLS 1.1 (SSL 3.2)
  • TLS 1.2 (SSL 3.3)
SSL Minimum Encryption Key Size
Specifies the minimum encryption key size allowed when selecting an SSL cipher. To prevent use of low- or medium-strength ciphers, change from the default value of 0 to 112, 128, or 256 (depending on the requirement). Note that if this value is set too high, all ciphers are filtered out causing the No suitable cipher suites are enabled exception to occur.
Possible values: 0 - n bits
Default value: 0
SSL Minimum Protocol Version
Specifies the minimum protocol version allowed. SSL 3.0 is the default value for compatibility with servers that do not support the more recent TLS versions 1.0, 1.1, and 1.2.
Possible values:
  • SSL 3.0
  • TLS 1.0 (SSL 3.1)
  • TLS 1.1 (SSL 3.2)
  • TLS 1.2 (SSL 3.3)
Default value: SSL 3.0
SSL Use Record Splitting
Indicates whether to use 1/n-1 record splitting in CBC mode as a countermeasure against the Rizzo/Duong BEAST (Browser Exploit Against SSL/TLS) attack against the SSL 3.0 / TLS 1.0 protocol. Must be turned off if the SSL library on the other side of the connection does not support the feature.
Possible values: On or Off
Default value: On
Terminate On Fail
If an error occurs during a command, stop the action. 
Note:

Regarding non-CHECK commands:  When Terminate On Fail is on, if a command fails, Email On Fail and Execute On Fail, if set, are processed, and then the action stops.  When Terminate On Fail is off, if a command fails, Email On Fail and Execute On Fail, if set, are processed, and the action continues.

Regarding CHECK commands:  Terminate On Fail is only honored if the ConditionsMet parameter is set and the result of the CHECK is classified as Error. The CHECK command is only available in the Cleo Harmony and Cleo VLTrader applications.

Possible values: On or Off
Default value: On
Unzip Use Path
Indicates whether or not zip entry paths should be used for LCOPY -UNZIP operations.  When enabled, the entry's path is added to the destination path, unless the entry contains an absolute path. In this case, the absolute path is used in place of the destination path. 
Possible values: On or Off
Default value: On
Wait For Execute On
Indicates whether execution should wait for processing to complete within an Execute On Fail, Execute On Successful Copy, Execute On Successful Receive, or Execute On Successful Send command.  Note that this option does not apply to native AS400 execution.
Possible values: On or Off
Default value: On
Zip Comment
Specifies the comment to be added to the zip archive file in LCOPY -ZIP operations.
Default value: The value specified for this property on the Options > Advanced panel, if set.
Zip Compression Level
Controls the level of compression for LCOPY -ZIP operations. If System Default is specified, the value set on the Configure > Options > Advanced takes precedence 
Possible values:
  • System Default
  • 9 - (Best Compression)
  • 8
  • 7
  • 6
  • 5
  • 4
  • 3
  • 2
  • 1
  • 0 - (No Compression)
Default value: System Default
Zip Subdirectories Into Individual Zip Files
Indicates whether or not subdirectories should be bundled for LCOPY –ZIP –REC operations.  When enabled, each first-level subdirectory (and all of its descendents) will be bundled together into an individual zip file.  The name of this zip file may optionally reflect the subdirectory name if an asterisk (*) is placed in the destination path.  Any files that are directly off the source root directory will not be copied. 
Possible values: On or Off
Default value: On
Parent topic: HSP host configuration
© 2018 Cleo. All rights reserved.